WARMUP DCM-PRO HEATING CABLE 20 SQ FT

Available Voltage: 120 Volt Only

The Warmup DCM-PRO Cable is a custom designed cable compatible with all uncoupling membranes. It can be installed at 2, 3 or 4 pegs. The cable itself allows primary heating thanks to the twin-core ETFE cable, for highest output. It is guaranteed 30-years. Even better results when used with Warmup 4iE® Smart Thermostat.

CABLE SPACING COVERAGE
Cable length (ft) Resistance
(?)
Amps Watts 2 pegs 3 pegs 4 pegs
66.3 55.4 2.16 260 13 20 27

The DCM-PRO Heating Cable is durable and flexible. It’s ETFE inner jacket allows for high heat output while it’s PVC outer sleeve protects for a smooth installation. The DCM-PRO Heating cable is suitable for use with both Membrane options.

The DCM-PRO Membrane’s castellations make fitting the Heating Cable easy, quick, and tool free! The DCM-PRO Membrane protects the secured cable from any potential damage during installation – leading to a reduced risk of cable failures.

Specifications;

  • Operating voltage - 120V, 208V or 240V
  • Thickness - 3/16” (4.5mm - +/- 0.2mm)
  • Output - Approx. 4W/lin foot
  • Construction - Multi-stranded, dual wire
  • Inner insulation - ETFE
  • Outer jacket - PVC
  • Earth braid - 85% min copper
  • Cold lead - 10ft (3m) long, 2 core braided

The Warmup DCM-PRO Cable is compatible with Schluter® DITRA-HEAT, Prodeso Heat Mat, Flextherm FLEXSnap, Heatmatrix and Warmup DCM-PRO Membrane

WARRANTY & MAINTENANCE When installed according to the installation manual, the DCM-PRO Cable is covered with Warmup’s 30-year manufacturer warranty.

Warmup How to Video's

Warmup Specifications and installation

Warmup DCM-PRO Heating Cable Spec

 

 

For those who are not from the lower 48 states (from Alaska or Hawaii) -

Shipping cost is for the lower 48 states Only. Any order submitted not from the lower 48 states (from Alaska or Hawaii) will be refunded and will not be shipped unless you contact us to determine and pay extra shipping cost. flooringsupplyshop.com