GLOBMARBLE CONCRETE RELEASE FOR STAMPING MATS - G-SR MINERAL OIL BASED RELASE AGENT READY TO USE FORMULA, 1 Gal Globmarble G-SR oil based release agent is formulated for releasing stamping mats, textured skins or texture rollers or any other decorative imprinting tools form concrete or polymer modified cementitious toppings and concrete overlays. - preventing a stamping or texturing tool from sticking to the surface; - outdoor and indoor use; - smooth finishes with a high level of details; - protects stamping and texturing tools and prolong their useful life. Ideal for projects where the messiness of powder has to be avoided. It may be used with integral colored concrete and color hardener. GlobMarble G?SR Release is ideal for general use to promote clean stripping of concrete forms. Regular use keeps them clean. It can produce attractive concrete surfaces without bugholes when used on non?absorptive forms and form liners made of plastic (ABS and PVC), elastomeric (urethane and silicone rubber), high density plywood overlays, aluminum and steel. Excellent results occur with wood, plywood, medium and low-density plywood overlays. G?SR will not stain ? even against concrete containing white cement and when heat curing is used. It does not interfere with the adhesion to concrete of sealers, caulk and paint. Coverage: 240 sq ft per 1 gallon Application: A clean, quality hand-pump sprayer equipped with a fan pattern spray nozzle recommended to apply GlobMarble G-SR Liquid Release. Spraying equipment must be resistant to solvent-based materials. Material should be applied to the surface of the concrete and texturing tools prior to imprinting the surface. Apply liberally, do not apply over a large area to prevent liquid release evaporating prior to the imprinting process. - Spraying (pump spray is preferred) - Wiping - Brushing One Gallon 128 FL.OZ. (3.78 L)