Millipore CHGE71TS3 Express SHC Cartridge and similar items

Key Specifications Table This Millipore CHGE71TS3 Express SHC Cartridge Filter is in unused condition and is guaranteed to be fully functional. This filter came from a local manufacturer that had surplus new old stock inventory. We urge customers to view all photos as they show overall condition, included accessories and useful information. Please feel free to contact us with any questions. The following information was taken directly from Millipore's site: Description Catalogue Number CHGE71TS3 Trade Name Millipore Express Description Millipore Express SHC Cartridge Filter 10 in. 0.5/0.2 µm Code 7 Silicone Product Information Device Configuration Cartridge Maximum Inlet Pressure, bar (psi) Forward - 7 bar (100 psi) @ 25 C; 1.7 bar (25 psi) @ 80 C; 1.0 bar (15 psi) @ 135 C; Reverse - 2.07 bar (30 psi) @ 25 C; 0.07 bar (1 psi) @ 135 C Cartridge Code Code 7 Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. Quality Level MQ400 Biological Information Bacterial Endotoxins Aqueous extraction contains ?0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Media Millipore Express SHC Sterilization 25 forward or 22 forward and 3 reverse SIP cycles of 30 min @ 135 C and 0.35 bar (5) or 3 forward SIP cycles of 30 min @ 135 C and 1 bar (15 psid); 25 autoclave cycles of 60 min @ 126 C Bacterial Retention Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10? CFU/cm using ASTM F838 methodology. Wettability Hydrophilic Physicochemical Information Pore Size 0.5 / 0.2 µm Air Diffusion at 23 C ?28.2 mL/min @ 2.8 bar (40 psig) in water Bubble Point at 23 C ?4000 mbar (58 psig) air with water Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Maximum Differential Pressure Forward: 6900 mbar (100 psi) @ 25 C; 1700 bar (25 psi) @ 80 C; 340 mbar (5 psi) @ 135 C. Reverse: 2100 mbar (30 psi) @ 25 C, 69 mbar (1 psi) @ 135 C Non-Fiber Releasing This product was manufactured with a Millipore Express membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). TOC/Conductivity After sterilization and a controlled water flush of 20 L, samples exhibited less than 500 ppb TOC per USP 643 and less than 1.3 µS/cm per USP 645 at 25 C. USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Dimensions Cartridge Nominal Length 10 in. (25 cm) Diameter 6.9 cm (2.7 in.) Filtration Area 0.49 m Device Size 10 in. Materials Information Chemistry Polyethersulfone (PES) Device Material Polypropylene/Polysulfone Seal Material Silicone (SI) Support Material Polypropylene Packaging Information Material Size 3 Material Package Double Easy-Open bag Specifications Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ?2 L RETAIL PRICE: USD 1,200.00