2006 Toyota Camry Year Specific Usa Built and similar items

2006 Toyota Camry Year Specific North American (USA) Built Sunroof Glass. The sunroof / seal is in good used condition. Measurements are 35 3/4" long and 18 3/4" wide. We have included the measurements so you can match it to the sunroof you need. ***This sunroof came on Camry model year 2006 but please double check your measurements to ensure a perfect fit. Aftermarket sunroofs have become very popular over the last 10 years, also Toyota used different size glass panels during the same model year 2006 in the Camry line depending on where the Camry was built, this is why it is so important to double check your measurements and bolt patterns (see pictures). The US built Camry models have one sunroof design, the Japan built Vehicles have another. If you look in your driver door jam, locate the VIN number, under that it should say "Made in USA" or "Made in Japan". If your switch looks like any in the last picture, you have an aftermarket sunroof. Please note this glass is year specific meaning this panel will only fit a 2006 North American Assembled Camry. This glass panel was removed from a 2006 Camry that had a blown engine so there is no unseen damage on this panel as is found with a majority of sunroof glass panels that are removed from wrecked vehicles. Often times on a wrecked vehicle, the metal trim around the glass, under the seal, will incur slight bends which will make the panel leak soon after. We have been dealing in sunroof glass panels for 20 years now and only sell the panels that come through our shop that are off of vehicles that have not been in major accidents. We also 100% inspect and clean the panels, especially the seals, in an effort to identify any imperfections that may cause issues down the road. Please double check your measurements against the ones I have listed to ensure a good fit. The glass panels are inspected after removal from the vehicle as the seals can be easily damaged during the removal process. The sunroof comes read to bolt in. Please contact us with any questions that you may have.