Gameboy Advance IPS V2 Screen Upgrade and 50 similar items

IPS V2 LCD Kit for Nintendo Gameboy Advance Compatible with both 32 and 40 pin AGB-001 motherboards. 10 Brightness levels (soldering required) Note: The IPS LCD is larger than the original GBA screen. The Gameboy Advance shell must be trimmed or pre-cut shell must be used for this modification. We also have pre-trimmed gameboy shells available. Please see our other listings if you want to make your install easier by purchasing a pre-trimmed shell. Many online tutorials and resources are available to assist with your install. We have installed hundreds of kits, so if you have questions, do not hesitate to ask :) Includes: IPS LCD Screen V2 Ribbon Cable (compatible with 32 and 40 pin boards) 3D Printed Centering Bracket Custom Mounting Adhesive 3 Wires for Brightness Level Adjustment Glass Gameboy Advance Screen Lens (sized for IPS display) Returns: We offer free returns for any uninstalled kits within 30 days. Though the cables and LCD kits have been tested, it is highly recommended you test before install. The adhesive is very sticky and the IPS LCD screens are delicate, easy to break on install. We recommend you install the top right corner first, followed by the bottom right, then the left side of the LCD (as you are looking down at the back of the screen). We will not be responsible for incorrect or unsuccessful installs and will not provide refunds for items with evidence of install. We appreciate your understanding.