New Panasonic EX-13EB-PN Photoelectric Sensor and 26 similar items

New Panasonic EX-13EB-PN CE Marking Directive Compliance ?EMC Directive ? EN 60947-5-2 ?RoHS Directive ?ISO 13849-1 (Category 1, PLc) (Note) (Note) : Conformed from December 2021 production. Sensing Range 500 mm 19.685 in Min. Sensing Object ø2 mm ø0.079 in opaque object (Completely beam interrupted object) (Setting distance between emitter and receiver: 500 mm 19.685 in) Hysteresis - Repeatability (Perpendicular to Sensing Axis) 0.05 mm 0.002 in or less Supply Voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less Current Consumption Emitter: 10 mA or less Receiver: 10 mA or less Output PNP open-collector transistor - Maximum source current: 50 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) Output: Utilization Category DC-12 or DC-13 Output: Short-Circuit Protection Incorporated Response Time 0.5 ms or less Operation Indicator Orange LED (lights up when the output is ON) Incident Beam Indicator - Stability Indicator Green LED (lights up under stable light received condition or stable dark condition) Pollution Degree 3 (Industrial environment) Protection IP67 (IEC) Ambient Temperature -25 to +55 ? -13 to +131 ? (No dew condensation or icing allowed), Storage: -30 to +70 ? -22 to +158 ? Ambient Humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient Illuminance Incandescent light: 3,000 lx or less at the light-receiving face Voltage Withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation Resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration Resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each Shock Resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each Emitting Element Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) Material Enclosure: Polyethylene terephthalate Lens: Polyalylate Cable 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Cable Extension Extension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver). (Note) : For safety applications, do not exceed 30 m 98.425 ft. Weight (Typ.) Net weight (each emitter and receiver): 20 g approx Gross weight: 50 g approx Accessory Mounting screws: 1 set Certification UL certification One Year Warranty